120 Single Serving Bags + ALL IN ONE  BACKYARD FOAM PIT MACHINE (Air Blower not included)

• 1 Foam Powder pack lasts about 45 minutes with this unit ; ready-to-use product
• Individually packaged - tear open, dump, stir....simple
• One pack mixes into 5 gallons of water. This unit functions with a siphon
• No odor when used properly
• 100% satisfaction guaranteed, Engineered & packaged in the USA
• Board-certified dermatologist approved
• THIS is your new drop-off item. You'll love it.

ALL IN ONE  BACKYARD FOAM PIT MACHINE (13 Ft x 13 Ft square foam pit, 3 ft tall), siphon, and hose. It does not include a blower or fan or stand and does not need those items.

Add your inflatable blower to the pit and that's all you need.  With this unit, there is no need for a stand, water pump or foam fan.  This pit has everything you need, sets up in less than 2 minutes, and creates foam in less than five minutes. The foam pit fits in practically any backyard.  It requires only one electrical plug and one water source as well as your own one HP blower. With this simple unit, no attendant is needed  if you use your own water pump, then you typically get more foam quicker. This unit requires your own 1 hp blower. Your blower creates the air to push the foam through the mesh sock to create foam. 

There's no need for a separate foam unit. The pit creates the foam. This means that the air needed to create foam comes from your blower. With this revolutionary foam generator, there is no stand or foam fan. Those items are not necessary. This is great for backyard drop off parties. 

All in 1 Pit set up instructions

1. Spread the foam pit out and attach your blower to the back of the foam pit.  Turn the blower on and the pit should inflate quickly. (A 1 hp blower is recommended) 
2. Undo the Velcro straps and strap the hose in.  Make sure the hose is centered.  Cut the excess fabric material away and trash it.
3. Next; attach your hose to the pump or siphon, depending on your setup.  
4. Screw the brass metal piece provided into the hose.  Next; screw the pointy spiral atomizer into the brass piece. Velcro the hose into place.
5. Attach the sock over the hose and atomizer with the attached velcro.
6. Place your siphon into your bucket of solution mixture.

• • Use a 1 hp blower.
  • Increase foam ratio: 5 gallons of water to 1.25 bags of powder
  • Use a stiff plastic hose! A larger inside diameter hose works best.
  • Atomizersimply hangs down in the middle of the sock. Photo in description 

Watch a set up video at  https://youtu.be/pyrHrAh-GZE